Description

Aqua EOS film inks print clean and fast!Low foaming and excellent dry-times make this system ANY press operators go to. These inks are available in a range of strength levels to achieve the best results that suit your press configuration.

Aqua EOS film inks can be ordered for both lamination application or surface print( when not utilizing an overprint varnish or lamination)

Key Features:

• Provides excellent formulation versatility in water based ink systems and coatings
• Excellent print characteristics,adhesion and leveling are some of the benefits
• Very low VOC’s

For pricing on other ink colors, please call 1-704-962-5404

Properties:
pH 9.3 ± 0.3
Viscosity 16 – 20”/#3 Zhan or 120 – 180 centipoise #3 spindle

Printing Suggestions:

• Recommended Pre-Test: Due to a vast selection of substrates, we recommend pre-testing intended
  substrate.
• Recommend: If not using treated substrate to test dyne level, optimum range is 32 – 38 dyne.

BCM Recommendation:

Formulated for a broad range AquaEos Series of inks work best within
the 2.0 BCM to 5.0 BCM range.Wash-up recommendation: Cleaner solutions typically recommended by anilox manufacturers are
suitable.

Do not store in temperatures exceeding 95°F or below 32°F for extended periods.

DISCLAIMER – The information compiled and provided on this data sheet are reported as tested under controlled conditions,
however it is the buyers responsibility to determine the fitness and suitability of its end use. Arpro M-Tec, LLc reserves the rights to
alter any data as a result of ongoing new technical and manufacturing process development for this product