Description

Release Coating
CREATES A REPELLENT SURFACE
Once applied and cured, RC creates an extreme hard, smooth surface with long term slip. Inks won’t adhere or adhere far less to surfaces. Allows clean up with less effort 523210R 4oz

***How far will a 4oz bottle go? An 80”X 26” area required 1/4oz. Each Prepare the surface to be coated.
*Good preparation = longer surface repellent.

Step 1.) Clean surface thoroughly and allow to dry.
Step 2.) Pour a small amount of Isopropyl alcohol onto clean twice folded microfiber towel, wipe surface to remove left over contaminates and allow to dry.
Product Code Unit Qty Apply Release Coating:
Step 1.) Pour a small amount of RC onto applicator pad.
Step 2.) Wipe in one direction until entire surface is treated.
Step 3.) Allow coating to sit on surface until you begin to see many lines form in it.
Step 4.) Use a clean twice folded microfiber towel and lightly wipe coating in one direction.
Step 5.) Allow to cure before use Cure Times:
8 hour cure allows the longest active life span for a repellent surface.
3 hour cure time is the minimum.
Maintaining the coated surface:
Do not use anything that will scratch through Release Coating.